Rockery making method
According to the rockery model made in advance, after conception, appropriate materials such as trees, stones, mountains and grass are selected for arrangement and combination to complete this idea. The basic operation process of rockery production is actually bonding.
The adhesives for bonding mountain rocks include cement (gray and white), epoxy resin and 307-1 unsaturated polyester resin. Considering the cheapness and convenience of use, cement is mostly used for rockery bonding. The higher the grade of cement, the better.
1. First, adjust the cement slurry. Note that the slurry should be adjusted with use, and pay attention to the consistency of the slurry. In order to increase the setting time, an appropriate amount of plugging material can be added to the cement; For the shaped stone to be attached to the stone body, it can be fixed with marble glue, and the colloid is covered with cement slurry after the colloid is dry to coordinate the overall tone.
2. Stone processing: use hammer, chisel, saw and other tools to process the stones that need to be glued into textures and strange shapes. In order to ensure that the upper and lower stone bodies support each other, the contact parts need to be cut.
3. For the bonding of mountains, the surface of mountains and stones to be bonded shall be coated with cement slurry to make the mountains and stones fit together. During bonding, pay attention to that for large, heavy and unstable stones, do not support them with small wooden sticks, and then bond them. After the cement slurry is completely dry, remove the wooden sticks. Try not to see the fracture trace at the bonding place of mountains and stones, and pay attention to cleaning the excess slurry at the bonding place.
In order to be close to nature, when the cemented mud is not dry, the stone chips of the stone can be coated at the joint. After gluing, use other supports to assist. The chemical glue can solidify and harden in 24 hours, and the cement can be moved in half a day in summer and 1-2 days in winter. After 3-4 hours of cement bonding, use a small knife and saw blade to gently scrape off the excess or contaminated cement of the stone body, and pull out the same texture as the stone at the joint.
5、 Installation of water purification system and circulating system
The return water of fountain and small waterfall mostly adopts self circulation type. That is, a water pump is used to absorb water from the pool and supply water to the source of the waterfall. The waterfall water then falls back to the pool and circulates again and again. If there is less water in the tank, open the make-up valve and add fresh tap water into the tank.
The installation method of the circulating system mentioned by the author (green man garden) may not be well understood by the readers. It doesn't matter. When purchasing the water purification system and circulating system, the shopkeeper will tell you the installation method, and even many will be installed on the door. Therefore, you don't have to worry.
6、 Rockery plant planting
There is generally less floating soil on the courtyard rockery, which is suitable for planting drought resistant plants. Pine and bamboo are more suitable. Some flowers with root or fleshy roots resistant to barren soil can be planted in the stone gap on the side. Chlorophytum (foliage) and Lily (flower) are recommended.
Rockery fish pond plant planting picture
Some broad-leaved foliage flowers, such as turtle backed bamboo and spring taro, can be planted next to the stream. If there is still water, calamus and water lily are indispensable. Shade loving plants such as ferns can be planted under the waterfall. After the overall layout, some colorful or elegant flowers can be rarely dotted (not too much) which can be selected according to personal preferences.
The wonderful content of this article is provided by Jinan rockery production. There are many wonderful content on this website. You can click to enter more content: http://www.sdjnjingguan.com We have special customer service to answer your questions