欢迎来到济南锦山绣水园林工程有限公司官方网站
热销产品关键词: 济南假山制作 济南上水石假山 济南庭院景观
产品 新闻
  • 济南上水石假山
  • 济南真石假山
  • 济南庭院景观
新闻中心
新闻中心
当前位置:首页 > 新闻中心 > 新闻中心 > 假山喷泉的水池标准要素!

假山喷泉的水池标准要素!

来源:http://www.sdjnjingguan.com/news/444.html  更新时间:2021-10-14
一般常见的景象水池深度均为0.6~0.8m,这样作法的原因是要确保合肥假山喷泉的吸水口的吞没深度,而且池底为一全体的平面,也便于池内管路设备的装置施工和保护。
Generally, the depth of the common scene pool is 0.6 ~ 0.8m. The reason for this practice is to ensure the swallowing depth of the suction port of Hefei rockery fountain, and the pool bottom is a whole plane, which is also convenient for the device construction and protection of pipeline equipment in the pool.
精巧的假山喷泉
Exquisite rockery fountain
只要在为表现亲水特色的浅蝶形池体规划时,才选用吸水坑或泵坑。0.6~0.8m的水深实际上存在着较大的不安全性。
As long as the shallow butterfly tank with hydrophilic characteristics is planned, the suction pit or pump pit can be selected. The water depth of 0.6 ~ 0.8m actually has great insecurity.
相同,在儿童戏水池规划中,一般选用的深度为0.3~0.6m左右,一旦幼儿落入景象池中的将是非常风险的。咱们以为较为适合的水深以0.2~0.4m为宜。
Similarly, in the planning of children's play pool, the depth generally selected is about 0.3 ~ 0.6m. Once children fall into the scene pool, it will be very risky. We think the more suitable water depth is 0.2 ~ 0.4m.
这样做的另一长处是,当水质浊度略高的,给人的感觉依然清澈见底。池壁顶面应可供游人坐下歇息,池壁顶面距地上高度一般为0.30~0.45m,除人工湖外,水面以高于地上为宜。若水面水位较低,便会有如临深潭的感觉。
Another advantage of this is that when the water turbidity is slightly high, it still feels clear to the bottom. The top surface of the pool wall shall be available for tourists to sit down and rest. The height from the top surface of the pool wall to the ground is generally 0.30 ~ 0.45M. Except for the artificial lake, the water surface should be higher than the ground. If the water level is low, it will feel like a deep pool.
从亲水的视点动身,较为适宜的标准是水面距池壁顶面为0.2m较为合理。潜水泵坑或水泵吸水口则只需部分加深以满意吸水条件,泵坑外表可设置篦子,即可遮盖设备又可作为格栅以阻挠大颗粒杂质吸入。从漂亮的视点动身,池外表应尽量削减显露的管道设备,尤其是笔直设置的溢流管口,它会在水面上升时发生很大的排水吸气声。
Starting from the hydrophilic point of view, the more appropriate standard is that the distance between the water surface and the top surface of the pool wall is 0.2m, which is more reasonable. The submersible pump pit or water pump suction port only needs to be partially deepened to meet the water absorption conditions. A grate can be set on the surface of the pump pit to cover the equipment and act as a grille to prevent the inhalation of large particle impurities. Starting from a beautiful point of view, the exposed pipeline equipment on the surface of the pool should be reduced as much as possible, especially the straight overflow pipe orifice, which will produce great drainage and suction sound when the water surface rises.