欢迎来到济南锦山绣水园林工程有限公司官方网站
热销产品关键词: 济南假山制作 济南上水石假山 济南庭院景观
产品 新闻
  • 济南上水石假山
  • 济南真石假山
  • 济南庭院景观
新闻中心
新闻中心
当前位置:首页 > 新闻中心 > 新闻中心 > 制作假山时如何避开假山石的裂痕

制作假山时如何避开假山石的裂痕

来源:http://www.sdjnjingguan.com/news/391.html  更新时间:2021-03-30
制作假山造景时,在选料的时候要轻击石头看看是否有哑裂声,落料锯截后观察截面有无老伤瘾裂痕。如有上述情况不予选用;如若要用,则仔细测算如何避开,加工时眼看、耳听,用力巧妙可防止损坏。
When making rockery for landscaping, when selecting materials, you should tap the stone to see if there is mute crack sound, and observe whether there are old cracks in the section after sawing. If the above situation does not choose; if you want to use, carefully calculate how to avoid, processing eyes, ears, force skillfully can prevent damage.
不论何种石料,首先要了解它的质地结构特点,在加工中才会因势力导去用力,从最能承受力的角度加工才不易断损。在加工时,每一锤、每一镐下去,所选择的的角度、力度都要根据造型结构与山石质地结构一起考虑。粗厚处的加工要留意薄弱处的震动是否受得了,不要认为现在加工的是厚实处无所顾忌,而忽略了薄弱处受震后的危害,即使加工薄弱处注意了轻手轻脚,而没有注意受力角度的研究,还是会造成山石断裂损害的。
No matter what kind of stone, we must first understand its texture and structural characteristics, in the processing will be due to force, from the point of view of the most bearable processing is not easy to break. In processing, the angle and strength of each hammer and pick should be considered according to the shape structure and rock texture structure. The processing of thick and thick parts should pay attention to whether the vibration of weak parts can be tolerated. Don't think that the processing of thick parts is reckless, and ignore the damage of weak parts after the earthquake. Even if the processing of weak parts pays attention to light handed and light footed, and does not pay attention to the study of stress angle, it will cause rock fracture damage.
所以在加工时,一定要知道被加工山石受力的中心部位及施力时山石能承受的撞击与震动限度,才知道如何用力,这是凭感觉及经验得出的技巧,加工山石中只要是注意是可以避免或减少损伤的。
Therefore, in processing, it is necessary to know the central part of the rock to be processed and the impact and vibration limit that the rock can bear when applying the force, so as to know how to apply the force. This is a skill based on feeling and experience. As long as attention is paid in processing the rock, damage can be avoided or reduced.
加工时思想要集中,不能分神,否则易造成山石断裂,假山制作是个技术活!造型宜有朴素自然之趣,不矫揉造作!
When processing, the mind should be concentrated, not distracted, otherwise it is easy to cause rock fracture, rockery production is a technical work! Modeling should be simple and natural, no affectation!