The texture, color, texture and surface features of the stone are delicately carved on the surface of the plastic. Texture and color according to the design requirements, with powder, toner according to proper proportion with white cement or ordinary powder transferred into mortar, according to rough, smooth, such as surface galling technique.
The skeleton structure has the brick structure, the steel frame structure, and the mixed structure of the two. The brick structure is simple for saving, Yamagata large changes in the site, with steel cantilever. The mountain waterfalls and fountains and reserved green caves, to prepare for waterproofing skeleton structure.
In surface water does not dry, basic color pigment powder and cement water mix well, sprinkle with layer by layer. In the crevice hole or the internal corner position slightly with a slightly darker color, surface to be dry in 90%, sprinkle a little green, black or white, such as the size and density of different spots, to enhance the sense of three-dimensional and natural feeling. The two is to use cement, yellow mud and river sand to make plastic mortar with strong plasticity on the already laid skeleton and repeatedly process, so that the modeling, texture, plastic and surface characterization basically close to the model.
This article is made by Ji'nan rockery. Our website is: http://www.sdjnjingguan.com, we will provide you with better service with wholehearted enthusiasm. Welcome to your visit.