The production process of cement rockery (also known as plastic stone rockery) refers to modern raw materials such as concrete, fiberglass corrosion, organic chemical epoxy resin and non-stone raw materials such as lime powder, brick and cement.

园林景观生产的塑石假山可以节省采石工艺流程，造型设计不受石材的限制，规模可大可小，下面为您介绍塑石假山制作工艺及流程。

The plastic stone rockery produced in the garden landscape can save the quarrying process. The modeling design is not limited by the stone, and the scale can be large or small. Here is the production process and process of the plastic stone rockery.

主龙骨构建，常用原材料尺寸应依据假山尺寸必须，一般是镀锌角钢、糟钢之类，假如需要的话，构建主龙骨的全过程应与此同时构建钢管脚手架，这一流程要保证总体载重及摆动的承受力，要牢。

For the construction of the main keel, the size of common raw materials shall be based on the size of the rockery, generally galvanized angle steel, bad steel, etc. If necessary, the steel pipe scaffold shall be constructed during the whole process of the construction of the main keel, and this process shall ensure the overall load and swing bearing capacity, and be firm.

构建副主龙骨。此时，假山的基本上部形状用6.5#电缆(建筑钢筋)焊接。这个过程应该使基础波动联系起来。

Build the auxiliary main keel. At this time, the basic upper shape of the rockery is welded with 6.5 # cable (building reinforcement). This process should link the fundamental fluctuations.

将镀锌角钢加固，并使副龙骨架与主龙骨进行对接，进一步完善主体结构。

The galvanized angle steel shall be reinforced and the auxiliary keel frame shall be connected with the main keel to further improve the main structure.

用电缆将造型设计数据加密细分为15厘米厚的网格图形。

Use cables to encrypt and subdivide the modeling design data into 15cm thick grid graphics.

主龙骨防锈。

The main keel is rust-proof.

用镀锌铁丝网将钢架结构包囊起来，网眼尺寸大概1cm比较适合，留意去除朝上的面之外最好不要重合。

Wrap the steel frame structure with galvanized wire mesh. The mesh size is about 1cm, which is more suitable. It is better not to overlap except the upward side.

用没有水泥砂浆的水泥添加适量的卫生纸灰和化学纤维丝，放水搅拌后擦抹于铁网表面，这层较为难，非常容易掉入网许可证孔里，添加化学纤维和卫生纸灰是因为提高黏性与粘合力。

Add a proper amount of toilet paper ash and chemical fiber yarn to the cement without cement mortar, and wipe it on the surface of the iron mesh after mixing with water. This layer is difficult and easy to fall into the mesh license hole. The chemical fiber and toilet paper ash are added to improve the viscosity and adhesion.

第一层水泥基本干燥后，在表面轻轻涂上1:1的水泥砂浆，使上一层更牢固。

After the first layer of cement is basically dry, lightly apply 1:1 cement mortar on the surface to make the previous layer more firm.

本层稍干后，可以在涂刷一层并做表层关键点或肌理效果，假如用五颜六色水泥做这一层得话，之后就可以无需做色调也行了进行之后喷漆内墙涂料、丙烯颜料做颜色实际效果

After this layer is slightly dry, you can paint a layer and make the surface key points or texture effect. If you use colorful cement to make this layer, then you can do it without color tone. Then paint the interior wall paint and acrylic paint to make the actual color effect

本文由济南假山制作友情奉献.更多有关的知识请点击:http://www.sdjnjingguan.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is made by Jinan rockery. For more information, please click: http://www.sdjnjingguan.com Sincere attitude. We will provide you with comprehensive services. We will continue to offer you more relevant knowledge. Please look forward to it