欢迎来到济南锦山绣水园林工程有限公司官方网站
热销产品关键词: 济南假山制作 济南上水石假山 济南庭院景观
产品 新闻
  • 济南上水石假山
  • 济南真石假山
  • 济南庭院景观
新闻中心
行业新闻
当前位置:首页 > 新闻中心 > 行业新闻 > 假山塑石表面污垢的清理方法

假山塑石表面污垢的清理方法

来源:http://www.sdjnjingguan.com/industry/366.html  更新时间:2020-12-08
不管是大型塑石假山还是小型的塑石小品,长期暴露于空气中都会沾染灰尘,季节交替时还会有落叶的乘积。很多人想到用水枪冲洗来清理,这样虽然简单容易操作,但有可能会破坏塑石表面的颜色层。假山塑石表面的污垢如何清理呢?今天就为大家简单介绍一下假山塑石的清洗方法。
No matter it is a large-scale rockery or a small-scale stone sculpture, long-term exposure to the air will be contaminated with dust, and there will be a product of fallen leaves when the seasons change. Many people think of using water gun to clean it. Although it is easy to operate, it may damage the color layer on the surface of plastic stone. How to clean the dirt on the surface of rockery? Today for you to briefly introduce the rockery plastic stone cleaning methods.
1,要及时的打扫塑石表面上的污染物,假山塑石表面有石纹和间隙,难免表面上会有一些缝隙,这样很多污染物就会容易的渗透进去,这样会对塑石内部的结构产生变化,形成一些人腻烦的污渍,所以我们在选择假山的防护剂的时候是需要对其质量进行把关的。
1. Timely clean the pollutants on the surface of the rockery. There are stone lines and gaps on the surface of the rockery. It is inevitable that there will be some cracks on the surface, so many pollutants will easily penetrate into the rock, which will change the internal structure of the plastic stone and form some people's bored stains. Therefore, we need to check the quality of the rockery protective agent when selecting it.
塑石表面的颜色层为水性颜料,不能与油性物质相混,否则会造成颜色层的破坏,防护剂易选择刺激性小、腐蚀性也小的水性溶剂,防护操作时建议咨询专业假山厂家。
The color layer on the surface of plastic stone is water-based pigment, which cannot be mixed with oily substances, otherwise the color layer will be damaged. The protective agent is easy to choose water-based solvent with small irritation and corrosion. It is recommended to consult professional rockery manufacturers for protection operation.
2,需要定期的进行保养才能维护表面的光泽,单纯的除去表面的灰尘这样是无法让塑石表面的光泽持续太长时间的。所以我们需要请专业的人员进行维护,利用结晶液或者是抛光粉让塑石的石材表面再次变得有光泽,也可以使用透气性的光芒掩护剂同样可以达到这样的效果。
2. Regular maintenance is needed to maintain the luster of the surface. Simply removing the dust on the surface can not make the luster of the plastic stone surface last too long. Therefore, we need to ask professional personnel for maintenance. We can use crystal liquid or polishing powder to make the stone surface of plastic stone become glossy again. We can also use the light shielding agent with air permeability to achieve the same effect.
3,定期清理灰尘和落叶,这里所说的定期可以一月一次,也可以一季度一次,但最久不能超过一季度,时间长了灰尘和落叶就有可能与塑石粘连,不易清理了。可以采用气泵吹扫,难以清理的部分,采用水枪远举例喷洒,使污垢慢慢滑落。清理完毕了,可以从专业假山厂家购买水性乳液喷涂,进行防护。
3. Dust and fallen leaves should be cleaned regularly, which can be once a month or once a quarter, but the longest time should not be more than one quarter. After a long time, the dust and leaves may adhere to the plastic stone, which is not easy to clean. The air pump can be used to purge the parts that are difficult to clean, and the water gun can be used to spray the parts far away to make the dirt slide down slowly. After cleaning up, you can buy water-borne emulsion spray from professional rockery manufacturers for protection.
对于假山塑石表面难以清理的油性污垢,最好请专业假山厂家来清理,涉及到塑石表面颜色层的保护和维护工作,那就不是简单的水清理就可以的。清理完毕后,假山表面的颜色过度问题可能需要修缮,这是专业技术人员的工作。定期的污垢清理能使假山塑石常用常新,增加塑石表面的光泽度,也延长假山的使用寿命。
For the oily dirt on the surface of rockery, it is better to ask professional rockery manufacturers to clean it. It involves the protection and maintenance of the color layer on the surface of the rockery, which is not a simple water cleaning. After cleaning, the surface of rockery may need to be repaired, which is the work of professional technicians. Regular cleaning of dirt can make rockery plastic stone often fresh, increase the glossiness of plastic stone surface, and prolong the service life of rockery.