There are several ways to make indoor rockery.
This is a problem that must be considered before making indoor rockery. We have to choose which kind of rockery to make and how to make it. Without the pre-production plan and the method of making the indoor rockery, there will be no way to start when making the indoor rockery. After conceiving the plan, we should draw the idea on paper, draw a general summary of the rockeries we want to make, and indicate the order of making rockeries. With the drawing, you can make a picture.
First of all, we should establish the concavo convex length, width and share of the rockery. Then we are ready to make things. There are electric cutting saws, chisel pliers, construction hammers, gray shovels, 5-minute wide brushes and so on. The materials needed for making indoor rockery include grey barrel hillstone, cement sand, marble glue, submersible pump, suction pipe, waterproof electrical rubber cloth, herb moss and so on.
The first step of making the indoor rockery is to adjust the cement slurry. Here is to pay attention to the cement slurry to follow suit and pay attention to the consistency of cement slurry. In order to add solidification time, a proper amount of plugging data can be added to cement. In addition, for the stone body which needs to be attached to the plastic stone body, it can be fixed with dolomite glue. After the colloid is dried, the colloid should be covered with cement slurry to harmonize the overall color.
The second step of making the indoor rockery is to further process the stone. The stones that need to be told are processed with hammers, chisels, saws, and so on to produce textures and unique shapes. In order to guarantee the mutual support of the upper and lower stones, the contact parts need to be cut and polished. The key point of indoor rockery carving is to determine the position and size of the main body according to the previous drawings, and then gradually saw the bottom with a small saw. Then we need to choose one side with more clear texture, and then process it based on the assumption. If the selected stone is turquoise, it can be cut with a steel saw, while if the selected hard stone is cut with an electric diamond saw blade. In the production method of indoor rockery, carving must first focus on the whole, use hammer chisel and other things to carve out the general summation of the peak, and finally do fine processing. The key point of processing is to ensure the natural beauty of the upper water stone as far as possible during processing.
The basic process of making indoor rockery is almost the same regardless of its length, width, size, concavity and convexity. First conceive, then select materials to prepare things, then grind and stitch according to the planning pattern bit by bit. What we need to pay attention to is that the stone should choose the same stone, adjacent texture, adjacent color, and related momentum. In addition, in order not to affect the water absorption of stone peak, it is necessary to cross the stack instead of the upper and lower splicing. When making indoor rockery, we should try our best not to see the crack marks in the bonding part of the rockery, and pay attention to the remaining slurry in the bonding part to eradicate the cleanliness. These key points should be taken care of, and the method of making rockery is basically formed.
This article is organized by Jinan Jinxiu Landscape Company http://www.sdjnjingguan.com. We will provide you with new knowledge of Jinan rockery production. Interested friends can pay attention to us. Thank you!!