The foot of the mountain rockery artificial rockery construction is the initial part of the construction, the main work includes the Euphrates, foot and foot. These three parts are closely linked. The bottom line is pulled, at the foot of the mountain range of the first layer of stone masonry, stone made bottom layer. Pull the bottom of the way and pull the bottom of the foot of the line to see the following brief.
A way to pull bottom
At the end of the way full of rockery pull pull bottom and pull around the bottom two.
1, full pull bottom line is at the foot of the mountain range in rocks with a layer of. This approach is suitable for small scale, the bottom of the bottom of the hill area is smaller or a rockery, rockery where frost damage in winter in northern china.
2, the bottom is pulled into a circle around the bottom of the stone in the rockery at the foot of the mountain along with the rocks and rubble masonry, brick or clay stone circle all filled up, after a compaction bottom bottom rockery. This way is suitable for the base area of the large rockery.
Two, the foot of the line processing
That exposed foot on the ground directly to the bottom line of the mountain to start stepping stone circle, the rockery is like putting on the ground like. This method can reduce the amount of rocks and the amount of labor, but the effect will be poor at the foot of the rockery shoot some.
Buried feet: the bottom of the hill is buried under the rocks surrounding the bottom about cm, can make the whole rockery look as though they were grown from the ground. In the edge foot soil planting, combined with ground rockery closer and more natural.
Three, technical requirements
1, pay attention to choose for the rocks to the bottom of the hill, not to loose with excessive weathering of rocks.
At the bottom of the 2, pulling the bottom rocks must ensure the flat pad stability, and could not shake, in order to masonry mountain.
3, pull the bottom of the stone and stone between the important even bite each other.
4, among the rocks or irregularly intermittent and broken.
The 5 part edge, pull the bottom, to make the scattered change, bending with different radius concave with different concave depth and width of the foot to avoid depression, flat and rounded shape.
After understanding the above information, you are not more trust in this product? You can also trust our products, and we look forward to your visit!