欢迎来到济南锦山绣水园林工程有限公司官方网站
热销产品关键词: 济南假山制作 济南上水石假山 济南庭院景观
产品 新闻
  • 济南上水石假山
  • 济南真石假山
  • 济南庭院景观
新闻中心
行业新闻
当前位置:首页 > 新闻中心 > 行业新闻 > 假山定位放样对石材厚度的要求

假山定位放样对石材厚度的要求

来源:http://www.sdjnjingguan.com/content-21-96-1.html  更新时间:2017-11-30
1、定位放样:根据图纸、模型及现场情况进行定位放样。
1, positioning setting out: positioning and setting out according to the drawings, models and field conditions.
2、预埋件埋置:现浇板块采用70*100*6的预埋件,间距1.5-2.5m埋置;框架柱身采用70*100*6的预埋件,间距2m埋置。
2, embedded parts embedded: cast-in-situ plate using 70*100*6 embedded 1.5-2.5m embedded frame column spacing; using 70*100*6 embedded 2m embedded space.
3、骨架制作:主材为50*50*5角钢,次要处用30-30-3角钢,涂刷防锈漆进行防锈处理,先进行塑石方形骨架制作,骨架角钢的间距尺寸一般控制在1.8-2.5m左右,连接采用焊接方式,然后根据模型进行左右斜拉,做出假山的大致形状。
3, skeleton production: advocate for 50*50*5 angle, 30-30-3 angle with the minor, brushed with antirust paint Antirust processing, advanced production line stone plastic square frame, frame angle pitch control in general about 1.8-2.5m, connected by welding, then according to the model about cable-stayed, shape to make rockery.
4、钢筋网片:在骨架制作完成后,用76圆钢进行钢筋网制作,钢筋网与角钢连接及钢筋与钢筋连接均采用焊接方式,钢筋网方格控制在18*18-25*25cm2左右,根据模型塑造出凹凸起伏的自然外形。
4: in the steel mesh skeleton after completion of production, with the 76 round of steel mesh production, steel mesh and connecting angle connection and reinforced bars are welded, steel grid control in about 18*18-25*25cm2, according to the model shape of concave convex natural shape.
5、铁丝网片:在钢筋网制作完成后,将规格为3*1/4(4目)的铁丝网绑扎其上面。
济南假山制作
5, wire mesh: after the completion of the steel mesh production, the specification of the 3*1/4 (4 mesh) wire mesh above it.
6、抹灰:铁丝网片安装完成后,用1:1水泥砂浆进行基层抹灰,厚度为1-1.5cm左右,一次完成后,进行二次抹灰,厚度为1.5cm左右。在假山外露部分的两层抹灰完成后,及时进行假山内部砂浆的抹制,厚度为1cm左右。
6, plastering: after the completion of the wire mesh installation, the 1:1 cement mortar is used for basic plastering, the thickness is about 1-1.5cm. Once completed, the plastering time is two times, the thickness is about 1.5cm. After the two layer plastering of the rockery is completed, the mortar inside the rockery is made in time, with a thickness of about 1cm.
7、造型:根据模型及所造山石的材质,对塑石假山进行造型,塑出石脉和条纹。
7, modeling: according to the model and the material made of the stone, the plastic rockery is molded, the stone veins and the stripes are made.
8、上色:根据所塑山石的位置及其作用,选择合适的氧化铁颜料进行调制、上色。
8, color: according to the position of the plastic mountain stone and its function, choose the appropriate iron oxide pigment for modulation and color.
公司全方位服务于客户,以质量上乘、价格合理和完善的售后服务与客户携手奋进,共同发展。质量保证,欢迎咨询洽谈。
The company serves the customer in all directions, with the high quality, the reasonable price and the perfect after sale service and the customers to advance hand in hand, and develop together. Quality assurance, welcome to consult the negotiation.