欢迎来到济南锦山绣水园林工程有限公司官方网站
热销产品关键词: 济南假山制作 济南上水石假山 济南庭院景观
产品 新闻
  • 济南上水石假山
  • 济南真石假山
  • 济南庭院景观
新闻中心
行业新闻
当前位置:首页 > 新闻中心 > 行业新闻 > 室内假山的制作办法有几个进程

室内假山的制作办法有几个进程

来源:http://www.sdjnjingguan.com/content-21-182-1.html  更新时间:2018-11-20
室内假山的制作办法有几个进程
There are several ways to make indoor rockery.
这是在制作室内假山前必须要考虑的问题。咱们要选择制作那一类型的假山,制作什么样的造型,都要事先规划好。没有制作前的计划,没有制定好室内假山的制作办法,在制作室内假山时就会无从下手。先构思好计划后,就要把构思画到纸上,画出想要制作的假山的大致归纳,标明制作假山的前后次序。有了图纸就可以照图制作了。
This is a problem that must be considered before making indoor rockery. We have to choose which kind of rockery to make and how to make it. Without the pre-production plan and the method of making the indoor rockery, there will be no way to start when making the indoor rockery. After conceiving the plan, we should draw the idea on paper, draw a general summary of the rockeries we want to make, and indicate the order of making rockeries. With the drawing, you can make a picture.
首先要树立假山的凹凸巨细长宽要份额调和。然后就是准备制作东西。制作室内假山需求的东西都有电动切开锯、凿子钳子、施工锤灰铲、5分宽毛刷等。制作室内假山需求准备的资料都有灰桶山石、水泥沙子、云石胶、潜水泵、吸水管、防水电工胶布、花草青苔等。
First of all, we should establish the concavo convex length, width and share of the rockery. Then we are ready to make things. There are electric cutting saws, chisel pliers, construction hammers, gray shovels, 5-minute wide brushes and so on. The materials needed for making indoor rockery include grey barrel hillstone, cement sand, marble glue, submersible pump, suction pipe, waterproof electrical rubber cloth, herb moss and so on.
室内假山的制作办法第一步先要调好水泥浆。这儿要留心一下水泥浆要随用随调并且要留心水泥浆的稀稠度。为了添加凝固时间可在水泥中加上适量的堵漏资料。还有对于石体上需附着造型石体可用云石胶固定,在胶体干后要用水泥浆掩盖胶体以调和全体颜色。
The first step of making the indoor rockery is to adjust the cement slurry. Here is to pay attention to the cement slurry to follow suit and pay attention to the consistency of cement slurry. In order to add solidification time, a proper amount of plugging data can be added to cement. In addition, for the stone body which needs to be attached to the plastic stone body, it can be fixed with dolomite glue. After the colloid is dried, the colloid should be covered with cement slurry to harmonize the overall color.
济南假山制作
室内假山的制作办法第二步就是要把石材做进一步加工。把需求告知的石头用锤子凿子锯等东西加工出纹理和比较独特的形状来。为了保证上下石体的相互支撑,对接触部位还需进行切开打磨加工。室内假山切雕要害是要依据之前画好的图样,断定主体位置和尺度巨细后用小锯渐渐锯平底部。然后就要选定纹理清楚窟窿多的一面为正面,再依据设想的作用进行加工。选择的石料如果是松石可以用钢锯锯截,而选了硬石就需求用电动金刚砂锯片锯截。在室内假山的制作办法中雕刻必须先从大处着眼,用锤子凿子等东西琢出山峰的大体归纳,最后做精细加工。加工重点是加工时尽量保证上水石的天然美感。
The second step of making the indoor rockery is to further process the stone. The stones that need to be told are processed with hammers, chisels, saws, and so on to produce textures and unique shapes. In order to guarantee the mutual support of the upper and lower stones, the contact parts need to be cut and polished. The key point of indoor rockery carving is to determine the position and size of the main body according to the previous drawings, and then gradually saw the bottom with a small saw. Then we need to choose one side with more clear texture, and then process it based on the assumption. If the selected stone is turquoise, it can be cut with a steel saw, while if the selected hard stone is cut with an electric diamond saw blade. In the production method of indoor rockery, carving must first focus on the whole, use hammer chisel and other things to carve out the general summation of the peak, and finally do fine processing. The key point of processing is to ensure the natural beauty of the upper water stone as far as possible during processing.
室内假山的制作办法不管假山的长宽巨细凹凸尺度,基本进程都是相差无几。先构思再选料准备东西然后依据规划图样一点点打磨拼接,需求留心的就是石料要选择相同石质,邻近纹理,邻近颜色,相关气势的。还有就是为了不影响石峰吸水,一定要横向叠拼而不是上下拼接。室内假山的制作办法在粘合山体时要尽量使山体粘合处看不出开裂的痕迹,并且要留心粘合处剩余的浆水要铲除洁净,这些要害留心了,假山的制作办法基本就成型了。
The basic process of making indoor rockery is almost the same regardless of its length, width, size, concavity and convexity. First conceive, then select materials to prepare things, then grind and stitch according to the planning pattern bit by bit. What we need to pay attention to is that the stone should choose the same stone, adjacent texture, adjacent color, and related momentum. In addition, in order not to affect the water absorption of stone peak, it is necessary to cross the stack instead of the upper and lower splicing. When making indoor rockery, we should try our best not to see the crack marks in the bonding part of the rockery, and pay attention to the remaining slurry in the bonding part to eradicate the cleanliness. These key points should be taken care of, and the method of making rockery is basically formed.
本文由济南锦绣山水景观公司http://www.sdjnjingguan.com整理,我们将为您提供新的济南假山制作知识,有兴趣的朋友可以关注我们,谢谢!!
This article is organized by Jinan Jinxiu Landscape Company http://www.sdjnjingguan.com. We will provide you with new knowledge of Jinan rockery production. Interested friends can pay attention to us. Thank you!!