欢迎来到济南锦山绣水园林工程有限公司官方网站
热销产品关键词: 济南假山制作 济南上水石假山 济南庭院景观
产品 新闻
  • 济南上水石假山
  • 济南真石假山
  • 济南庭院景观
新闻中心
行业新闻
当前位置:首页 > 新闻中心 > 行业新闻 > 你知道室内假山应怎么正确制造吗

你知道室内假山应怎么正确制造吗

来源:http://www.sdjnjingguan.com/content-21-174-1.html  更新时间:2018-10-23
你知道室内假山应怎么正确制造吗
Do you know how the interior rockery should be made right?
依据所塑山石的方位极端效果,挑选合适的氧化铁颜料进行调制.上色。在塑石水分未干透时进行,根本色调用颜料粉和水泥加水拌匀,逐层洒染。在石缝孔洞或阴角部位略洒稍深的色调,待塑石九成干时,在凹陷处洒上少量绿.黑或白色等巨细.疏密不同的斑驳,济南假山制造小编告诉您以增强立体感和天然感。
According to the azimuth effect of the stone hill, appropriate iron oxide pigments are selected for modulation. When the moisture content of the plastic stone is not dry, mix the pigment with powder and cement and mix with water. Sprinkle slightly deeper tones in the cracks and holes or shady corners of the stone. When the stone is dry, sprinkle a small amount of green, black or white on the depression. Different patches are dense. Jinan rockery fabrication small weave tells you to enhance the sense of three-dimensional and natural.
室内阳台假山鱼池的制造过程具体能够分为五步,分别是:挑选石材.砌筑鱼池.刷防水粉.制造假山.装置循环系统。
The manufacturing process of indoor balcony rockery fish pond can be divided into five steps: selecting stone, building fish pond, brushing waterproof powder, making rockery and installing circulatory system.
1.挑选石材:常用石材有:英石.龟纹石.吸水石.千层石等四大类
1. stone selection: commonly used stones are: English stone, tortoise stone, absorbent stone, thousand layers of stone, and so on four major categories.
2.砌筑鱼池:砌筑鱼池一般都会选用普通红砖砌筑,鱼池需求多深,红砖就相应的砌多高。
2. Masonry fish pond: Masonry fish pond will generally choose ordinary red brick masonry, fish pond needs more deep, red brick on the corresponding masonry more high.
3.刷防水粉:当水池基体砌筑结束,并洒水保养24h后便可进行防漏施工。
3. brush waterproof powder: when the bottom of the tank body is finished, and after watering and maintenance 24h, the leakage prevention construction can be carried out.
济南假山制造
Ji'nan rockery manufacturing
济南假山制作
济南假山制造小编告诉您水泥假山制造方法:
Ji'nan rockery manufacturing Xiaobian tells you how to make cement rockery:
1.定位放样:依据施工总平面图,进行场所整理,畅通路途,对实地进行勘查,复核标高及与周围修建的彼此方位联系,断定施工规模。
1. Positioning and lofting: According to the general construction plan, site arrangement, smooth access, on-the-spot exploration, review the elevation and the surrounding construction of each other's orientation, determine the construction scale.
2.打底:放样开线挖土方浇混凝土垫层打基础。
2. bottoming: laying out the open line and digging the earthwork pouring concrete cushion to lay the foundation.
3.预埋件埋置:预埋件坐落现浇砼上外表时,据预埋件尺度和运用功用的不同,有如下3种固定方式。
3. Embedding the embedded part: When the embedded part is situated on the surface of cast-in-situ concrete, according to the size and function of the embedded part, there are three kinds of fixing methods as follows.
平板型预埋件尺度较小,可将预埋件直接绑扎在主筋上,但在浇筑砼过程中,需随时调查其方位状况,以便出现问题后及时解决。
Flat-plate embedded parts with small size can be directly tied to the main reinforcement, but in the process of pouring concrete, it is necessary to investigate its orientation at any time, so as to solve problems in time.
角钢预埋件也能够直接绑扎在主筋上,为了避免预埋件下的砼振捣不密实,应在固定前先在预埋件上钻孔供砼施工时排气。
Angle steel embedded parts can also be directly tied to the main reinforcement. In order to avoid the vibration of the concrete under the embedded parts is not compact, it is necessary to drill holes in the embedded parts for concrete construction before fixing.
济南锦绣山水景观公司,对济南假山制作感兴趣的朋友可以关注我们http://www.sdjnjingguan.com,敬请期待更多精彩内容
Jinan Jinxiu Landscape Co., Ltd. Anyone interested in making Jinan rockery can pay close attention to us at http://www.sdjnjingguan.com. We look forward to more exciting content.