欢迎来到济南锦山绣水园林工程有限公司官方网站
热销产品关键词: 济南假山制作 济南上水石假山 济南庭院景观
产品 新闻
  • 济南上水石假山
  • 济南真石假山
  • 济南庭院景观
新闻中心
行业新闻
当前位置:首页 > 新闻中心 > 行业新闻 > 如何了解制作室内假山?

如何了解制作室内假山?

来源:http://www.sdjnjingguan.com/content-21-152-1.html  更新时间:2018-07-03
一、制作假山需要准备如下工具、材料:
First, we need to prepare the following tools and materials for making rockery:
工具:电动切割锯、凿、钳子、施工锤、灰铲、5分宽毛刷等。
Tools: electric cutting saw, chisel, pliers, construction hammer, ash shovel, 5 point wide brush.
材料:灰桶、山石、水泥、沙子、云石胶、潜水泵、吸水管、防水电工胶布、花草青苔等。
Material: ash bucket, mountain stone, cement, sand, marble glue, submersible pump, suction pipe, waterproof electric adhesive tape, flower moss and so on.
二、 假山的制作过程:
Two, the process of making the rockery:
1、构思设计:在假山制作前,必须要做到胸有成竹,制作哪一类,什么造型,都要确定好,否则就无从下手,根据构思,初步在纸上画出轮廓形状。注:假山的高低、大小要与制作的高宽大小比例协调。
1, the design: before making the rockery, we must make a good idea of what kind of style and shape. Otherwise, we should not be able to draw the outline on the paper. Note: the height and size of rockery should be coordinated with the ratio of height to width.

2、粘合胶接假山:
2. Adhesive glued to the rockery:
第一步:先要调好水泥浆,注意浆要随用随调,还要注意浆的稀稠度。为增加凝固时间,可在水泥中适量加入堵漏材料;对于石体上需附着造型石体,可用云石胶固定,在胶体干后用水泥浆覆盖胶体,以协调整体色调。
The first step is to first adjust the cement slurry, note that the slurry should be adjusted along with the usage, and pay attention to the consistency of the slurry. In order to increase the solidification time, a proper amount of plugging material can be added to the cement, and the stone body should be attached to the stone body and can be fixed with Michal glue, and the colloid is covered with cement paste after the gel is dried to coordinate the whole hue.
第二步:石材加工,把需要胶接的石头用锤、凿、锯等工具加工出纹理和比较奇特的形状来。为保证于上下石体相互支撑,对接触部位还需进行切割加工。切雕要点:
The second step: stone processing, the need for bonding stones with hammers, chisels, saws and other tools to produce textures and more peculiar shape. In order to ensure mutual support between the upper and lower stones, the contact parts need to be machined. Carving points:
济南假山制作根据已绘的图样,确定主体位置和大小尺寸。然后用小锯慢慢据平底部。接着选定纹理清晰,洞穴多的一面为正面,根据设想的效果进行加工。松石可用钢锯锯截,硬石则需用电动金钢砂锯片锯截。
The manufacture of Ji'nan rockery is based on the drawn pattern to determine the location and size of the main body. Then use a small saw to slow down the bottom. Then select the texture clear, the side of the cave is positive, and process according to the desired effect. Pine stones can be sawed by steel saws, and hardened stones need to be sawed by electric steel saw blades.
如有需要,欢迎新老客户前来选购!我们本着质优价廉的宗旨来为您提供产品和服务。真诚期待与您合作!
If there is a need, welcome new and old customers to choose and buy! We aim to provide products and services for you with the aim of quality and low price. Sincerely look forward to working with you!