In the construction of large area, in addition to anchor bars fixed, it is also necessary to spot welding proper angle steel in the upper part to prevent the displacement of the embedded parts, and to drill and exhaust on the anchor plate when necessary. For large embedded parts, it is necessary to drill holes on anchor plates to vibrate concrete, but the location and size of boreholes can not affect the normal use of anchor plates.
The plate type embedded parts are small in size, and the preembedded parts can be directly lash up on the main tendons, but in the process of pouring concrete, it is necessary to observe the position of the embedded parts at any time so as to solve the problem in time.
A small steel bar is laid on the already formed skeleton and welded, fixed and molded by an electric welder. This step can basically determine the basic shape of the rockery. Lay the steel wire mesh on the steel frame that has been built, then bind and fix it with small steel wire.
The angle steel embedded parts can also be directly lashed on the main tendons. In order to prevent the concrete from making the buried parts of the rockery made, it should be drilled on the preembedded parts before fixing.
The mortar bottom is molded with cement, yellow mud and river sand to form plastic mortar on the already built skeleton. With repeated processing, the shape, texture, plastic surface and surface characterization are basically close to the rockery making model.
The above is the Ji'nan rockery production today's sharing, are you satisfied, welcome to our website: http://www.sdjnjingguan.com and pay attention to our products, we will provide you with excellent products, sincerely wish to establish a cooperative relationship with you.