Ji'nan rockery production in the need to adhere to the stone surface with a cement paste to match the stone as one, when the bonding should be paid attention to, for large, heavy, unstable stone, do not use a stick to support (the following map), then adhesive, after the cement slurry is completely dry, then the wooden stick removed.
As far as possible, do not see any trace of the fracture at the bonding point of the stone. In order to get close to nature, when the cemented mud is not dry, stone chips of stone bearing material can be applied to the joints. After gluing, other supports are used to assist.
Gelatine can be hardened in 24 hours, and cement can be moved in half a day and 1-2 days in winter. 3-4 hours after cement bonding, scraps of excess or contaminated stone cement can be scraped lightly with a small saw blade, and the same texture as the stone can be pulled out at the joint.
Stone processing, the need for bonding stones with hammer, chisel, saws and other tools to produce textures and strange shapes. In order to ensure mutual support between the upper and lower stones, the contact parts need to be machined.
First, we must adjust the cement slurry, note that the slurry should be used along with the adjustment, and pay attention to the consistency of the slurry. In order to increase the solidification time, a proper amount of plugging material can be added to the cement, and the stone body should be attached to the stone body and can be fixed with Michal glue, and the colloid is covered with cement paste after the gel is dried to coordinate the whole hue.
We are willing to welcome the eight party guests with the best sense of service, sincerely cooperate with friends from all walks of life at home and abroad, and create a bright future together. Welcome everyone to visit and discuss!