欢迎来到济南锦山绣水园林工程有限公司官方网站
热销产品关键词: 济南假山制作 济南上水石假山 济南庭院景观
产品 新闻
  • 济南上水石假山
  • 济南真石假山
  • 济南庭院景观
新闻中心
行业新闻
当前位置:首页 > 新闻中心 > 行业新闻 > 加工出纹理是假山制作的关键

加工出纹理是假山制作的关键

来源:http://www.sdjnjingguan.com/content-21-118-1.html  更新时间:2018-02-15
人工假山制作必需要做到胸有成竹,第一、构思设计 假山制作前。制作哪一类,什么造型,都要确定好,否则就无从下手,根据构思,初步在纸上画出轮廓形状。注意:假山的高低、大小要与制作地高宽大小比例协调。
Artificial rockery production must be done in the chest, first, before the design of the design of the rockery. What kind of production, what shape, all should be determined, otherwise it will not be from the next, according to the idea, the initial outline of the outline of the shape. Attention: the height and size of the rockery should be coordinated with the size and size of the making land.
第二、粘合胶接假山 1先要调好水泥浆,注意浆要随用随调,还要注意浆的稀稠度。为增加凝固时间,可在水泥中适量加入堵漏资料;对于石体上需附着造型石体,可用云石胶固定,胶体干后用水泥浆覆盖胶体,以协调整体色调。
Second, the first 1 adhesive rockery to adjust the cement slurry, slurry to be in tune with the attention, but also pay attention to dilute pulp consistency. In order to increase the solidification time can be added in the cement plugging materials; stone should be attached for other available stone, marble glue fixed, colloid with dry cement slurry cover colloid, to coordinate the overall tone.
2石材加工,把需要胶接的石头用锤、凿、锯等工具加工出纹理和比较奇特的形状来。为保证于上下石体相互支撑,对接触部位还需进行切割加工。
济南假山制作
2 stone processing, the need to glue the stone with hammer, chisel, saw and other tools to produce texture and more peculiar shape. In order to ensure that the upper and lower stone bodies support each other, the contact parts need to be cut and processed.
3粘合山体,需要粘合的山石面用涂上水泥浆使山石吻合为一体,粘合时要注意,尽量使山石粘合处看不出断裂的痕迹,还要注意把粘合处多余的浆清除干净。假山制作施工心得:这个工序是制作的重点,做山体粘合前需对已有石材做形状分类。石体宽厚可作为下层基石,石体外表机理丰富、勾缝明显作为中层资料、端头自然扁薄者作为顶峰造型使用。
3, bonding the mountain area, we need to bind the stone surface, and use the cement slurry to make the mountain stone anastomosed into one. When we glue, we should pay attention to that we can not see the trace of the fracture in the stone bonding place, and we should also clean up the excess slurry in the adhesive part. The construction of rockery: this process is the focus of the production. Before the mountain is glued, it needs to be classified in the shape of the existing stone. The stone body can be used as the foundation of heavy lower, the stone body appearance, pointing mechanism rich information, obviously as the middle end use as natural thin peak shape.
注意需要塑出大概的形状 钢筋焊好之后,外面扎一层钢丝网,然后开始塑造基础层粉刷。第一次塑型粉刷是做个基层。第三、做二次防水处理,最好做几次防水测试。
Attention needs to be made of the shape of the shape of the steel bar after welding, the outside of a wire mesh, and then start to mold the basic layer of brush. The first plastic painting is a base. Third, do two waterproof treatment, it is better to do several waterproofing tests.
本文由济南假山制作友情奉献.更多有关的知识请点击:http://www.sdjnjingguan.com我们将用最先进的技术.最真诚的态度.为您提供最为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
This paper consists of Ji'nan rockery production friendship devotion. More related knowledge: Please click http://www.sdjnjingguan.com we will use the most advanced technology. The most sincere attitude, to provide you with the most comprehensive service. More related knowledge and we will continue to offer. Please look forward to.