欢迎来到济南锦山绣水园林工程有限公司官方网站
热销产品关键词: 济南假山制作 济南上水石假山 济南庭院景观
产品 新闻
  • 济南上水石假山
  • 济南真石假山
  • 济南庭院景观
新闻中心
新闻中心
当前位置:首页 > 新闻中心 > 新闻中心 > 假山山体着色前应保证山体的干燥性

假山山体着色前应保证山体的干燥性

来源:http://www.sdjnjingguan.com/content-20-67-1.html  更新时间:2017-08-22
  1、济南假山制作基础工程:基础结构浇筑时应埋好钢材主骨架的预埋铁件、型钢骨架。

  1, Ji'nan rockery production infrastructure: the basic structure of casting, should be buried good steel skeleton of the embedded iron parts, steel skeleton.

  2、定点放样:对塑石假山定点定位,采用网格法在现场确定山体的外轮廊线及水平点,沿轮廓线放出基础的挖土线。

  2, site lofting: stone plastic rockery fixed point, the use of grid method to determine the scene of the mountain outer corridor and horizontal points, along the contour line to release the foundation of the excavation line.

  3、主骨架安装:主骨架采用镀锌钢材,作为结构主受力部分,应根据山体造型的体量大小和高低要求,定出每根钢材的长度尺寸,逐根焊接,焊接质量应符合规范要求,焊缝应进行除锈防除处理。

  3, the main frame: the main frame adopts galvanized steel structure, as the main force, should be based on the terrain modeling volume size and height requirements, set each steel length size, by root welding, the welding quality should meet the standard requirements, the weld should be rust control.

  4、钢筋网绑扎:采用Φ 6圆钢,间距150x150,焊接于结构骨架上,钢筋网需做防腐处理。在钢筋网格表面绑扎钢网前,依照钢筋网格的高低起伏逐块绑扎固定,再根据设计山体质感纹理的造型要求,进行局部敲压修整处理,做出山体的整体轮廓线条。

  4, steel mesh binding: the use of phi 6 round bar, spacing 150x150, welded to the structure of the skeleton, steel mesh need to do anti-corrosion treatment. In the steel mesh surface binding steel net, steel grid in accordance with the ups and downs by block binding fixed, according to the designing of the texture modeling requirements, local pressure dressing on the mountain, and make the overall contour lines.
济南上水石假山厂家

  5、次骨架安装:次骨架采用镀锌钢材,作为主骨架与山皮间的连接,要求最大间距在1米以内,充分使山体牢固支撑的主结构上。

  5, sub skeleton installation: sub skeleton galvanized steel, as the main framework and the connection between the mountain skin, requiring maximum spacing of less than 1 meters, so that the mountain is firmly supported on the main structure.

  6、山体纹理粗造型:根据模型及图纸的要求及整体塑石假山风格,对山体中的山脉、峰峦、洞穴、溪流、断层、壁顶、石纹等外部轮廓进行初步造型制作,整体效果达到造型自然、比例适当、整体连贯性强。

  6, mountain coarse texture modeling: according to the model and the requirements of the drawings and the overall style of the rockery, mountain in the mountains, mountains, caves, streams, faults, wall top, stone and other external contour of a preliminary model of production, the overall effect to other natural, proper proportion, strong continuity.

  7、山体着色:山体着色前应保证山体干燥并清理表面。先喷涂抗碱底漆,再依照要求基调颜色选用耐候型户外专用色浆及外墙乳胶漆调色,多次多层喷涂润色,以达到艺术效果要求,最后喷涂保护剂。

  7, mountain coloring: Mountain coloring should ensure that the mountain dry and clean the surface. First spray alkali resistance primer, and then in accordance with the requirements of the tone color, the use of weatherproof type of outdoor special color paste and exterior wall latex paint toning, multi layer spray finishing, in order to achieve the desired effect of art, and finally spray protective agent.

  本文由济南假山制作友情奉献.更多有关的知识请点击:http://www.sdjnjingguan.com/我们将用最先进的技术.最真诚的态度.为您提供最为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

  This paper consists of Ji'nan rockery production friendship devotion. More related knowledge: Please click http://www.sdjnjingguan.com/ we will use the most advanced technology. The most sincere attitude, to provide you with the most comprehensive service. More related knowledge and we will continue to offer. Please look forward to.