The alkali cement and a certain standard alkali resistant glass fiber are dispersed in a two-dimensional way and uniformly dispersed in the mold. When spraying, it should be pressed with the spray, and the steel connections should be embedded in the proper position for welding.
Select the texture of a special natural stone for the mother, clean the surface of the stone, smear a layer of demoulding agent on the surface, to paint the Junyuan, especially the grooves do not feed. Coat a layer of 0.3mm thick paste, brush the fiberglass cloth on the top, then brush it again after drying. Brush three layers of three layers of glass fiber cloth. After drying the mold, it is a soft mold.
The stone, which is made up of the pre - made stone, is transported to the site and spliced according to the design requirements. The welding should be firm, the gap is pursued by nature, and the truth is modified.
The soft mold is buckled in the original pattern on the mother's parent, coated on the surface of the soft mold, coated with a layer of epoxy resin and then coated with a layer of fiberglass cloth, three layers, and then a hard mold.
The above is the Ji'nan rockery production today's sharing, are you satisfied, welcome to our website: http://www.sdjnjingguan.com and pay attention to our products, we will provide you with excellent products, sincerely wish to establish a cooperative relationship with you.