欢迎来到济南锦山绣水园林工程有限公司官方网站
热销产品关键词: 济南假山制作 济南上水石假山 济南庭院景观
产品 新闻
  • 济南上水石假山
  • 济南真石假山
  • 济南庭院景观
新闻中心
新闻中心
当前位置:首页 > 新闻中心 > 新闻中心 > 对假山制作实地进行勘查的要求

对假山制作实地进行勘查的要求

来源:http://www.sdjnjingguan.com/content-20-136-1.html  更新时间:2018-04-17
  假山制作在骨架焊接制作:建造骨架结构骨架结构有砖结构、钢架结构以及两者的混合结构等。砖结构简便节省,对于山形变化较大的部位,要用钢架悬挑。山体的飞瀑、流泉和预留的绿化洞穴位置,要对骨架结构做好防水处理。

  The manufacture of rockery is made in skeleton welding: the skeleton structure, skeleton structure, brick structure, steel frame structure and the mixed structure between them. The brick structure is simple for saving, Yamagata large changes in the site, with steel cantilever. The mountain waterfalls and fountains and reserved green caves, to do waterproof processing of frame structure.

  定位假山制作放样:根据施工总平面图,进行场地整理,畅通道路,对假山制作实地进行勘查,复核标高及与周围建筑的相互位置关系,确定施工范围。

  Positioning of rockery production: according to the general plan of the construction, the site is arranged, the road is smooth, the rockery is made in the field, the elevation and the relationship with the surrounding buildings are reviewed, and the scope of the construction is determined.

  预埋件位于现浇砼上表面时,据预假山制作埋件尺寸和使用功能的不同,有如下3种固定方式。
济南假山制作

  When embedded parts are located on the surface of cast-in-place concrete, there are 3 ways to fix the embedded parts according to their size and function.

  (1)平板型预埋件尺寸较小,可将预埋件直接绑扎在主筋上,但在浇筑砼过程中,需随时观察其位置情况,以便出现问题后及时解决。

  (1) the plate type embedded parts are small in size, and the preembedded parts can be directly tied up on the main tendons, but in the process of pouring concrete, it is necessary to observe the position of the embedded parts at any time so as to solve the problem in time.

  (2)角钢预埋件也可以直接绑扎在主筋上,为了防止假山制作预埋件下的砼振捣不密实,应在固定前先在预埋件上钻孔供砼施工时排气。

  (2) the angle steel embedded parts can also be directly lashed on the main tendons. In order to prevent the concrete from making the buried parts of the rockery made, it should be drilled on the preembedded parts before fixing.

  (3)面积大的预埋件施工时,除用锚筋固定外,还要在其上部点焊适当规格角钢,以防止预埋件位移,必要时在锚板上钻孔排气。对于特大预埋件,须在锚板上钻振捣孔用来振实砼,但钻孔的位置及大小不能影响锚板的正常使用。

  (3) in the construction of large embedded parts, in addition to anchor bars fixed, it is also necessary to spot welding proper angle steel in the upper part to prevent the displacement of the embedded parts, and to drill and exhaust on the anchor plate when necessary. For large embedded parts, we need to drill holes on anchor plates to vibrate concrete, but the location and size of boreholes can't affect the normal use of anchor plates.

  本文由济南假山制作友情奉献.更多有关的知识请点击:http://www.sdjnjingguan.com我们将用最先进的技术.最真诚的态度.为您提供最为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

  This article is made in friendship and dedication from Ji'nan rockery. More related knowledge, please click: http://www.sdjnjingguan.com we will use the most advanced technology. The most sincere attitude. Provide you with the most comprehensive service. More related knowledge will be devoted to you. Please look forward to it.