欢迎来到济南锦山绣水园林工程有限公司官方网站
热销产品关键词: 济南假山制作 济南上水石假山 济南庭院景观
产品 新闻
  • 济南上水石假山
  • 济南真石假山
  • 济南庭院景观
新闻中心
新闻中心
当前位置:首页 > 新闻中心 > 新闻中心 > 确定假山主体位置和大小尺寸的方式

确定假山主体位置和大小尺寸的方式

来源:http://www.sdjnjingguan.com/content-20-121-1.html  更新时间:2018-02-23
先要调好水泥浆,注意浆要随用随调,还要注意浆的稀稠度。为增加凝固时间,可在水泥中适量加入堵漏材料;对于石体上需附着造型石体,可用云石胶固定,在胶体干后用水泥浆覆盖胶体,以协调整体色调。
The first set of cement slurry, slurry to be in tune with the attention, but also pay attention to dilute pulp consistency. In order to increase the solidification time can be added in the cement plugging material; for stone body attached to other available stone, marble glue fixed, covered with cement slurry in the colloid colloid after dry, to coordinate the overall tone.
石材加工,把需要胶接的石头用锤、凿、锯等工具加工出纹理和比较奇特的形状来。为保证于上下石体相互支撑,对接触部位还需进行切割加工。切雕要点:
Stone processing, the need to glue the stone with hammer, chisel, saw and other tools to produce texture and more peculiar shape. In order to ensure that the upper and lower stone bodies support each other, the contact parts need to be cut and processed. Carving points:
济南假山制作
(1)根据已绘的图样,确定主体位置和大小尺寸。然后用小锯慢慢据平底部。接着选定纹理清晰,洞穴多的一面为正面,根据设想的效果进行加工。松石可用钢锯锯截,硬石则需用电动金钢砂锯片锯截。
(1) determine the position and size of the main body according to the drawings that have been drawn. Then use a small saw to slow down the bottom. Then the selected texture is clear, and the side of the cave is on the front, which is processed according to the desired effect. Turquoise available steel saw cut, hard rock with electric steel saw blade cutting sand.
(2)雕琢必须先从大处着眼,用锤子、凿子等工具琢出山峰的大体轮廓,然后进行精细加工。切记:加工时尽量保持上水石的自然美态。
(2) Polish must start with outline Tools pay attention to important points, hammer, chisel cut out of the mountain, and then fine processing. Remember: try to keep the natural beauty of the state on the stone processing.
本文由济南假山制作为您提供,我们的网站是:http://www.sdjnjingguan.com我们将以全心全意的热情为您提供更优质的服务,欢迎您的访问!
This article is made by Ji'nan rockery. Our website is: http://www.sdjnjingguan.com, we will provide you with better service with wholehearted enthusiasm. Welcome to your visit.